Development of the reinforced concrete resistance theory in the zone about reinforcement

The actual problem of resistance of near-reinforcement zone of concrete is solved as a problem of volumetric stress-strain state with "closure" of output integral parameters of this zone on the rod scheme of the whole reinforced concrete element synthesizing hypotheses and dependencies of various disciplines of mechanics of solid deformation body, including fracture mechanics. The calculation model of the reinforced concrete element takes into account the effect of reinforced concrete of prof. Vl.I. Kolchunov describing the mechanism of formation and development of transverse and longitudinal cracks. In this case, generalized hypotheses of linear and angular deformations for warping and gradients of jumps of relative mutual displacements of reinforcement and concrete are adopted. New functionals of reinforced concrete are constructed, which are consistent with the ideas about resistance of crosssections of rod elements in near-reinforcement zones. Physical equations for a concrete matrix modeled between transverse cracks are written.

The displacement components for the near-reinforcement area are found in relation to the crack opening width at the boundary of the "concrete-reinforcement" contact in transverse, longitudinal and radial cracks, respectively. The use of the accepted assumptions and multi-level calculation scheme for the near-reinforcement region significantly brings the calculation model closer to a real assessment of physical phenomena.

1. Bondarenko V.M., Kolchunov V.I. Computational models of the strength resistance of reinforced concrete. Moscow: ASV Publ.; 2004. (In Russ.)

2. Golyshev A. B., Kolchunov V.I. Resistance of reinforced concrete. Kyiv: Osnova Publ.; 2009. (In Russ.)

3. Karpenko N.I. General models of reinforced concrete mechanics. Moscow: Stroyizdat Publ.; 1996. (In Russ.)

4. ACI Committee 318-14. Building Code Requirements for Structural Concrete and Commentary. - Farmington Hills, Mich: American Concrete Institute. 2014.

5. EN 1992-1-2: 2004. Eurocode 2: Design of concrete structures – Part 1-1: General rules and rules for buildings. 2004.

6. CEB (Comit´e Euro-International du Beton). CEB-FIP Model Code 2010: Model Code for concrete structures. Ernst & Sohn, Wiley, Berlin, Germany. 2013..

7. Building Code SP 5.03.01-2020. Concrete and reinforced concrete structures. Minsk, 2020. (In Russ.)

8. Building Code SP 63.13330.2018 Concrete and reinforced concrete structures. General provisions. 2018.. (In Russ)

9. Manual for calculating reinforced concrete elements working in torsion with bending. - M.: Ministry of Construction of Russia. 2020. (In Russ)

10. Frosch R. J. Another look at cracking and crack control in reinforced concrete. ACI Structural Journal. 1999;96(3):437–442.

11. Murashev V.I. Crack resistance, rigidity and strength of reinforced concrete. - Publisher: Mashstroyizdat Publ.;1950. (In Russ)

12. Thomas F. G. Cracking in reinforced concrete. The Structural Engineer. 1936; 14:298–320.

13. Iakovenko I., Kolchunov Vl. The development of fracture mechanics hypotheses applicable to the calculation of reinforced concrete structures for the second group of limit states. Journal of Applied Engineering Science. 2017;15(455):366–375. http://doi.org/10.5937/jaes15-14662(In Russ)

14. Travush V.I., Karpenko N.I., Kolchunov Vl.I., Kaprielov S.S., Demyanov A.I., Bulkin S.A., Moskovtseva V.S. Results of experimental studies of high-strength fiber reinforced concrete beams with round crosssections under combined bending and torsion. Structural Mechanics of Engineering Constructions and Buildings. 2020; 16(4):290–297. http://dx.doi.org/10.22363/1815-5235-2020-16-4-290-297(In Russ)

15. Klyueva N.V., Yakovenko I.A., Usenko N.V. On the calculation of the opening width of inclined cracks of the third type in composite reinforced concrete structures. Industrial and civil engineering. 2014; 1:37–40. (In Russ)

16. Dem'yanov, A.I., Yakovenko, I.A., Kolchunov, V.I. The development of universal short dual-console element for resistance of reinforced concrete structures under the action torsion with bending. Izvestiya Vysshikh Uchebnykh Zavedenii, Seriya Teknologiya Tekstil'noi Promyshlennostithis. 2017; 370(4):246–251. (In Russ)

17. Travush V.I., Kashevarova G.G., Martirosyan A.S., Kuzminykh V.S. Study of the process of destruction of adhesion bonds during pressing of a rigid reinforcement rod into concrete. Part 1: Experimental studies. International Journal for Computational Civil and Structural Engineering. 2016; 12(1):140-146. (In Russ)

18. Dey A., Valiukas D., Jakubovskis R., Sokolov A., Kaklauskas G. [Experimental and Numerical Investigation of Bond-Slip Behavior of High-Strength Reinforced Concrete at Service Load] [Materials. 2021; 15(1): 293.

19. Bado M. F., Casas J. R., Kaklauskas G. Distributed Sensing (DOFS) in Reinforced Concrete members for reinforcement strain monitoring, crack detection and bond-slip calculation. Engineering Structures. 2021; 226:111385. (In Russ)

20. Kaklauskas G., Sokolov A., Sakalauskas K. Strain compliance crack model for RC beams: primary versus secondary cracks. Engineering Structures. 2023; 281: 115770. (In Russ)

21. Rimkus A., Cervenka V., Gribniak V., Cervenka J. Uncertainty of the smeared crack model applied to RC beams. Engineering Fracture Mechanics. 2020; 233: 107088. (In Russ)

22. Kolchunov Vl. I. Generalized hypotheses of warping of linear and angular deformations in reinforced concrete structures under bending with torsion. Russian Journal of Building Construction and Architecture. 2023;1 (59):9-26. (In Russ.)

23. Kolchunov V. I. Some problematic tasks of the modern theory of reinforced concrete and their solutions. [Fundamental, exploratory and applied research of RAASN on scientific support for the development of architecture, urban planning and the construction industry of the Russian Federation in 2021. ]2022: 130-141. (In Russ.)

24. Kolchunov Vl. I. Method of calculation models of resistance for reinforced concrete. Structural Mechanics of Engineering Constructions and Buildings. 2023; 19(3):261-275. (In Russ.)

25. Kolchunov Vl. I., Karpenko S. N. Rigidity of reinforced concrete structures under complex resistance. Russian Journal of Building Construction and Architecture. 2022; 1(65):11–24. (In Russ.)

26. Kolchunov V. The Effect of Reinforced Concrete for Crack Resistance and Rigidity Based on Mechanics of Fracture Under Bending with Torsion. Modern Problems in Construction: Selected Papers from MPC 2021. 2022:79-95. (In Russ)

27. Kolchunov Vl.I., Nikulin A.I., Obernikhin D.V. Crack opening width of reinforced concrete structures with trapezoidal cross-section taking into account new resistance effects. Bulletin of BSTU named after V.G. Shukhov. 2018; 10: 64-73. (In Russ)

28. Veryuzhskiy Y.V., Kolchunov V.I. Methods of reinforced concrete mechanics: textbook. K.: Book publishing house NAU, 2005. 653 с. (In Russ)