Program and methodology of experimental studies of reinforced concrete elements with external reinforcement with composite materials in bending with torsion
https://doi.org/10.33979/2073-7416-2023-110-6-50-57
Abstract
External reinforcement of reinforced concrete structures with composite materials is successfully used for strengthening of damaged elements. At the same time, torsion with bending of such reinforced concrete structures is poorly studied and requires experimental and theoretical investigation. The scientific literature presents the results of the study of strength and deformability in bending with torsion of reinforced concrete elements of different cross-sectional shapes under static and dynamic loads, elements of composite cross-section. For reinforced concrete structures strengthened with external reinforcement by composite materials, such studies were carried out only for bending elements. The authors have developed a program and methodology of experimental studies of such structures. The results of experimental investigations according to the proposed methodology will allow us to verify the assumed design model, the working assumptions put in its basis and reveal the regularities of deformation of reinforced concrete structures with external composite reinforcement under bending with torsion.
About the Authors
S. I. MerkulovRussian Federation
Merkulov Sergei Iv. - corresponding Member of the RAACS, doctor of technical sciences, professor, head of the department of Industrial and Civil Engineering.
Kursk
S. O. Kashuba
Russian Federation
Kashuba Sergei Ol. - graduate student of the department of Construction and Urban Economy.
Belgorod
S. M. Esipov
Russian Federation
Esipov Stanislav M. - candidate of technical sciences, associate professor of the department of Construction and Urban Economy.
Belgorod
References
1. Merkulov S.I., Esipov S.M., Esipova D.V. Kompozitnye sistemy vneshnego armirovaniia zhelezobetonnykh konstruktsii [Composite systems for external reinforcement of reinforced concrete structures]. Bulletin of Belgorod State Technological University named after V.G. Shukhov. 2022. No. 4. Pp. 39-48. doi:10.34031/2071-7318-2021-7-4-39-48. EDN HMWONY. (rus)
2. Rimshin V.I., Merkulov S.I., Esipov S.M. Betonnye konstruktsii, usilennye kompozitnym materialom [Concrete structures strengthened with composite material]. Vestnik Inzhenernoi shkoly Dal'nevostochnogo federal'nogo universiteta. 2018. No. 2(35). Pp. 93-100. doi:10.5281/zenodo.1286034. EDN USTLHE (rus)
3. Merkulov S.I., Esipov S.M. Ispol'zovanie tkanykh kompozitov dlia vosstanovleniia stroitel'nykh konstruktsii [The use of woven composites for the recovery of building structures]. Izvestiya Vysshikh Uchebnykh Zavedenii, Seriya Teknologiya Tekstil'noi Promyshlennosti. 2019. No. 3(381). Pp. 256-259. EDN KWLBPI. (rus)
4. Esipov S.M., Merkulov S.I. Usilenie zhelezobetonnykh elementov vneshnim armirovaniem [Strengthening of reinforced concrete elements by external reinforcement]. Belgorod: Belgorod State Technological University named after V.G. Shukhov, 2023. 179 p. ISBN 978-5-361-00890-2. EDN AZCHQU. (rus)
5. Badalova E.N. Usilenie izgibaemykh zhelezobetonnykh konstruktsii ugleplastikovoi armaturoi [Strengthening of bending reinforced concrete structures with carbon fiber reinforcement]. Vestnik Polotskogo gosudarstvennogo universiteta. Seriya F. Prikladnye nauki. Stroitel'stvo. 2007. No. 6. Pp. 54-59. EDN XDDHSP. (rus)
6. Merkulov D.S. K vyboru raschetnoi modeli silovogo soprotivleniia zhelezobetonnykh elementov pri izgibe s krucheniem [To the choice of the design model of the force resistance of reinforced concrete elements during bending with torsion]. Industrial and civil engineering. 2009. No. 10. Pp. 46-48. EDN KWNHQV. (rus)
7. Dem'ianov A.I., Sal'nikov A.S., Kolchunov V.I. Eksperimental'nye issledovaniia zhelezobetonnykh konstruktsii pri kruchenii s izgibom i analiz ikh rezul'tatov [Experimental studies of reinforced concrete structures in torsion with bending and analysis of their results]. Building and reconstruction. 2017. No. 4(72). Pp. 17-26. EDN ZHHHHB. (rus)
8. Rezul'taty eksperimental'nykh issledovanii konstruktsii kvadratnogo i korobchatogo sechenii iz vysokoprochnogo betona pri kruchenii s izgibom [Results of experimental studies of square and box-shaped crosssection structures made of high-strength concrete during torsion with bending]. V.I. Travush, N.I. Karpenko, V.I. Kolchunov [and others]. Building and reconstruction. 2018. No. 6(80). Pp. 32-43. EDN VQNSNS. (rus)
9. Merkulov S.I., Starodubtsev S.V. Eksperimental'nye issledovaniia sterzhnevykh zhelezobetonnykh elementov sostavnogo secheniia, podvergnutykh izgibu s krucheniem [Experimental studies of rod reinforced concrete elements of composite section subjected to bending with torsion]. Building and reconstruction. 2012. No. 2(40). Pp. 20-24. EDN OZMBZH. (rus)
10. Rodevich V.V., Arzamastsev S.A. Eksperimental'nye issledovaniia zhelezobetonnykh elementov, rabotaiushchikh na izgib s krucheniem, pri staticheskom i kratkovremennom dinamicheskom vozdeistviiakh [Experimental studies of reinforced concrete elements working on bending with torsion under static and short-term dynamic influences]. ZHilishchnoe stroitel'stvo. 2014. No. 10. Pp. 15-18. EDN STWXON. (rus)
11. Dronov A.V., Drokin S.V., Frolov N.V. Eksperimental'noe issledovanie stsepleniia stekloplastikovoi armatury s betonom [Experimental study of the adhesion of fiberglass reinforcement with concrete]. Industrial and civil engineering. 2016. No. 11. Pp. 80-83. EDN XACMZR. (rus)
12. Iushin A.V., Morozov V.I. Eksperimental'nye issledovaniia dvukhproletnykh zhelezobetonnykh balok, usilennykh kompozitnymi materialami po naklonnomu secheniiu [Experimental studies of two-span reinforced concrete beams strengthened with composite materials along an inclined section]. Vestnik grazhdanskikh inzhenerov. 2014. No. 5(46). Pp. 50-57. EDN TBPWWF. (rus)
13. Merkulov S.I., Esipov S.M., Esipova D.V. Computer Simulation of Bent Reinforced Concrete Elements with External Composite Reinforcement. Lecture Notes in Civil Engineering. 2021. Vol. 151 LNCE. P. 153-159. doi:10.1007/978-3-030-72910-3_22. EDN KYOWIG.
14. Modeling of the Stress-Strain State of a Composite External Strengthening of Reinforced Concrete Bending Elements / S.I. Merkulov, V.I. Rimshin, I.L. Shubin, S.M. Esipov // IOP Conference Series: Materials Science and Engineering : International Science and Technology Conference "FarEastCon 2019", Vladivostok, Russky Island, 01–04 октября 2019 года. Vol. 753, 5, Chapter 4. – Vladivostok, Russky Island: Institute of Physics Publishing, 2020. Pp. 052044. doi:10.1088/1757-899X/753/5/052044. EDN ZPVTEJ.
15. Merkulov S.I., Esipov S.M., Kashuba S.O.Predvaritel'noe opisanie raboty zhelezobetonnykh elementov s vneshnim armirovaniem kompozitnymi materialami pri izgibe s krucheniem [Preliminary description of the work of reinforced concrete elements with external reinforcement with composite materials during bending with torsion]. Bulletin of Belgorod State Technological University named after V.G. Shukhov. 2022. No. 11. Pp.40-48. doi:10.34031/2071-7318-2022-7-11-40-48. EDN EFOFCS. (rus)
Review
For citations:
Merkulov S.I., Kashuba S.O., Esipov S.M. Program and methodology of experimental studies of reinforced concrete elements with external reinforcement with composite materials in bending with torsion. Building and Reconstruction. 2023;(6):50-57. (In Russ.) https://doi.org/10.33979/2073-7416-2023-110-6-50-57