Preview

Building and Reconstruction

Advanced search

The rigidity of the external wall panel with opening of residential building I-515/5 series in case bias

https://doi.org/10.33979/2073-7416-2021-98-6-28-35

Abstract

There were a number of characteristic damages and defects in typical panel houses when examine, one of which are tilts and biases of wall panels. The stiffness of the wall panel with the opening of residential building I-515/5 series has been determined at a given bias in its plane. The panel was calculated numerically using a nonlinear deformation model by the finite element method and analytically. The software package, LIRA-SAPR 2017, was used in this investigation. The calculation was carried out taking into account the nonlinearity and material creep. As a result, the fields of normal and shear stresses in the panel were obtained and the shear rigidity was calculated. The analysis of the obtained results showed that a possible decrease of the actual stiffness of the panel should take into account against the calculated stiffness was obtained according to the standards.

About the Authors

A. S. Markovich
RUDN University
Russian Federation

Markovich Aleksey S., candidate in technical sciences, associated professor, associated professor of the department of construction

Moscow



M. I. Abu Mahadi
RUDN University
Russian Federation

Abu Mahadi Mohammed I., candidate in technical sciences, associated professor, associated professor of the department of construction

Moscow



D. A. Miloserdova
RUDN University
Russian Federation

Miloserdova Darya A, PhD student, assistant of the department of construction

 Moscow



References

1. Gagarina A.A., Manasyan V.S. Issledovanie napryazhennogo sostoyanya naryzhnoy stenovoy paneli s proemom pri zadannom perekose [Investigation of the stress state of an external wall panel with an opening in case given bias]. Structural Mechanics and Analysis of Constructions. 1969. No. 5. (rus)

2. Gagarina A.A., Manasyan V.S., Borisov M.V. Rabota naryzhnyh stenovyh panelei na vertikalnye nagryzki [Operation of external wall panels for vertical loads]. M.: Stroyizdat, 1971. 111 p. (rus)

3. Alexander C.M., Heidberecht A.C., Tso W.К. Cyclic Load Test on Shear Wall Panels. Proc. V WCEE. 1973.

4. Gerasimov E.P. To the definition of normative reliability by deformations reinforced concrete bending elements. The Siberian Transport University Bulletin. 2018. No. 3. Pp. 77-81. (rus)

5. Granovsky A.V., Dottuev A.I., Smirnov V.A. Experimental and theoretical research in strength and deformability of contact-platform joints of large-panel buildings. Promyshlennoe i grazhdanskoe stroitel'stvo [Industrial and civil construction]. 2016. No. 12. Pp 65-70. (rus)

6. Kosheleva Zh.V. Determination the reliability of reinforced concrete structures during exploitation. Collection of articles of the XVIII International Scientific and Technical Conference. Penza, 2018. Pp. 64-68. (rus)

7. Nikolaev S.V., Shrejber, A.K., Hautin, U.G. Innovative systems of frame-panel housing construction. Zhilishchnoe stroitel'stvo. 2014. No. 5. Pp. 3-5. (rus)

8. Galishnikova V.V., Tamrazyan A.G., Dekhtere D.S. Assessment of Ponderability of Parameters of Platform Joint on Reliability by Method of Linearization. J.Mech.Cont.& Math. Sci., Special Issue -1. 2019. Pp. 271- 281.

9. Nikolaev S.V., Shrejber A.K., Etenko V.P. Panel and frame house building is a new stage of large-panel construction development. Zhilishchnoe stroitel'stvo. 2015. No. 2. Pp. 3-7. (rus)

10. Perelmuter A.V., Slivker V.I. Raschetnye modeli sooruzhenij i vozmozhnost' ih analiza [Calculation models of structures and the possibility of their analysis]. Moscow: DMK Press, 2011. 709 p.

11. Gorodeckij A.S., Nazarov, YU.P., ZHuk, YU.N. Improving the quality of calculations of building structures based on the joint use of STARK ES and LIRA software systems. Information bulletin GU MO Mosoblgosexpertiza. 2005. No. 1(8). Pp. 42-49. (rus)

12. Gorodetskij D.A., Barabash M.S., Vodopyanov R.Y., Titok, V.P., Artamonova, A.E. The program complex LIRA-SAPR 2013. Textbook. Edited Gorodetskij A.S.. Electronic edition, Moscow. URL: https://www.liraland.ru/files/lira2013/format-pdf/

13. Agapov V.P. Finite Element Method in Static, Dynamics and Stability of Structures. Textbook. 2nd, Edition. Publishing House of Educational Civil Engineering Institutions. Moscow, 2004. 376 p.

14. Agapov V.P. Nonlinear static and buckling analysis of thin plates and shells by finite element method. International Journal for Computational Civil and Structural Engineering. 2007. No. 3(2). Pp. 13-19.

15. Agapov, V.P., Bardysheva, Y.A., Minakov, S.A. Accounting for physical and geometric nonlinearity in the calculation of reinforced concrete slabs and shells of variable thickness by the finite element method. Construction mechanics and calculation of structures. 2010. No. 5. Pp. 62-66.

16. Code of Practice 63.13330.2018 Concrete and reinforced concrete structures. Design requirements. The Research Center of Construction. 2018, Moscow. 155 p.

17. Posobie po raschetu krupnopanel'nyh zdanij. Vypusk 1. Harakteristiki zhestkosti sten, elementov i soedinenij krupnopanel'nyh zdanij [Guide to calculating large-panel buildings. Issue 1. Characteristics of the stiffness of walls, elements and joints of large-panel buildings]. Strojizdat. Moscow, 1974.

18. VSN 32-77. Instrukciya po proektirovaniyu konstrukcij panel'nyh zhilyh zdanij [Instructions for the design of structures for panel residential buildings]. Strojizdat. Moscow, 1978

19. Code of Practice 335.1325800.2017. Large-panel construction system. Design rules. The Research Center of Construction. 2017, Moscow. 155 p.

20. Dobromyslov A.N. Defekty v konstrukciyah pri stroitel'stve. [Defects in srtuctures during construction]. Izdatel'stvo ASV. Moscow. 2009. 192 p. (rus)


Review

For citations:


Markovich A.S., Abu Mahadi M., Miloserdova D.A. The rigidity of the external wall panel with opening of residential building I-515/5 series in case bias. Building and Reconstruction. 2021;(6):28-35. (In Russ.) https://doi.org/10.33979/2073-7416-2021-98-6-28-35

Views: 185


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2073-7416 (Print)