Preview

Building and Reconstruction

Advanced search

EXPERIMENTAL ASSESSMENT NUMERICAL SIMULATION OF STEEL BEAMS WITH DIFFERENT BOUNDARY CONDITIONS

https://doi.org/10.33979/2073-7416-2019-81-1-48-55

Abstract

The problems of numerical calculations of structures for bending are considered. The substantiation of the selected theme of research is given. The numerical calculations of steel I-beams with the subsequent experimental verification of the results are performed. The calculations were carried out in a physically nonlinear formulation, taking into account the actual material deformation diagram. Various conditions for supporting models are considered, including taking into account friction forces. Pure bend models of steel beams were tested. A description of the models, the characteristics of the test equipment, support and load devices performed. The analysis of the results of bending tests of models and comparison with the calculated data is done. The graphs of deformation of models under load with different boundary conditions, obtained from the results of experimental and numerical studies, are given. An estimate of the accuracy of ultimate loads and vertical displacements, obtained by calculation, with respect to experimental data is given.

About the Author

A. S. Krylov
Research Center of Construction TSNIISK named after V.A. Koucherenko
Russian Federation


References

1. Femap Users Guide (Examples): https://www.plm.automation.siemens.com/global/ru/products/simcenter/femap.html

2. Шимкович Д.Г. Femap & Nastran. Инженерный анализ методом конечных. М.: ДМК Пресс, 2012. 700 с.

3. Рычков С.П. Моделирование конструкций в среде MSC.visual NASTRAN для Windows. М.: НТ Пресс, 2004. 552 с.

4. Данилов Ю.В., Артамонов И.А. Практическое использование NX. М.: ДМК Пресс, 2011. 332 с.

5. Травуш В.И., Конин Д.В., Рожкова Л.С., Крылов А.С., Каприелов С.С., Чилин И.А., Мартиросян А.С., Фимкин А.И. Экспериментальные исследования сталежелезобетонных конструкций, работающих на внецентренное сжатие // Academia. Архитектура и строительство. 2016. №3. С. 127-135.

6. Травуш В.И., Конин Д.В., Крылов А.С., Каприелов С.С., Чилин И.А. Экспериментальные исследования сталежелезобетонных конструкций, работающих на изгиб // Строительство и реконструкция. 2017. №4 (72). С. 63-71.

7. Travush V. I., Konin D. V., Krylov A. S. Strength of composite steel and concrete beams of high-performance concrete // Magazine of Civil Engineering. 2018. №3 (79). Pp. 36-44.

8. Travush V. I., Konin D. V., Krylov A. S. Strength of reinforced concrete beams of high-performance concrete and fiber reinforced concrete // Magazine of Civil Engineering. 2018. № 1 (77). Pp. 90-100.

9. Травуш В.И., Каприелов С.С., Конин Д.В., Крылов А.С., Кашеварова Г.Г., Чилин И.А.Определение несущей способности на сдвиг контактной поверхности «сталь-бетон» в сталежелезобетонных конструкциях для бетонов различной прочности на сжатие и фибробетона // Строительство и реконструкция. 2016. №4 (66). С. 45-55.

10. Конин Д.В., Олуромби А.Р. Анализ устойчивости прямошовных и спиральношовных труб из высокопрочных сталей при центральном и внецентренном сжатии на примере натурных экспериментов // Известия высших учебных заведений. Строительство. 2018. №6 (714). С. 106-116.

11. ГОСТ 8829-94 Изделия строительные железобетонные и бетонные заводского изготовления. Методы испытаний нагружением. Правила оценки прочности, жесткости и трещиностойкости. М., 1994.

12. ГОСТ 1497-84 Металлы. Методы испытаний на растяжение. М., 1984.

13. СП 16.13330.2011 Стальные конструкции. М., 2011.


Review

For citations:


Krylov A.S. EXPERIMENTAL ASSESSMENT NUMERICAL SIMULATION OF STEEL BEAMS WITH DIFFERENT BOUNDARY CONDITIONS. Building and Reconstruction. 2019;(1):48-55. (In Russ.) https://doi.org/10.33979/2073-7416-2019-81-1-48-55

Views: 124


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2073-7416 (Print)