<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//NLM//DTD JATS (Z39.96) Journal Publishing DTD v1.3 20210610//EN" "JATS-journalpublishing1-3.dtd">
<article article-type="research-article" dtd-version="1.3" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xml:lang="ru"><front><journal-meta><journal-id journal-id-type="publisher-id">construction</journal-id><journal-title-group><journal-title xml:lang="ru">Строительство и реконструкция</journal-title><trans-title-group xml:lang="en"><trans-title>Building and Reconstruction</trans-title></trans-title-group></journal-title-group><issn pub-type="ppub">2073-7416</issn><publisher><publisher-name>Орловский государственный университет имени И.С. Тургенева</publisher-name></publisher></journal-meta><article-meta><article-id pub-id-type="doi">10.33979/2073-7416-2023-109-5-76-86</article-id><article-id custom-type="elpub" pub-id-type="custom">construction-659</article-id><article-categories><subj-group subj-group-type="heading"><subject>Research Article</subject></subj-group><subj-group subj-group-type="section-heading" xml:lang="ru"><subject>АРХИТЕКТУРА И ГРАДОСТРОИТЕЛЬСТВО</subject></subj-group><subj-group subj-group-type="section-heading" xml:lang="en"><subject>ARCHITECTURE AND TOWN-PLANNING</subject></subj-group></article-categories><title-group><article-title>Криволинейные формы в архитектуре зданий и сооружений в начале XXI-го века</article-title><trans-title-group xml:lang="en"><trans-title>Curvilinear forms in architecture of buildings and erections</trans-title></trans-title-group></title-group><contrib-group><contrib contrib-type="author" corresp="yes"><name-alternatives><name name-style="eastern" xml:lang="ru"><surname>Алборова</surname><given-names>Л. А.</given-names></name><name name-style="western" xml:lang="en"><surname>Alborova</surname><given-names>L. A.</given-names></name></name-alternatives><bio xml:lang="ru"><p>Алборова Лана Анатольевна, архитектор отдела архитектурно-строительной мастерской -1</p><p>г. Москва</p></bio><bio xml:lang="en"><p>Alborova Lana A., architect of the department of architectural and construction workshop -1</p><p>Moscow</p></bio><email xlink:type="simple">dikko@yandex.ru</email><xref ref-type="aff" rid="aff-1"/></contrib><contrib contrib-type="author" corresp="yes"><name-alternatives><name name-style="eastern" xml:lang="ru"><surname>Мамиева</surname><given-names>И. А.</given-names></name><name name-style="western" xml:lang="en"><surname>Mamieva</surname><given-names>I. A.</given-names></name></name-alternatives><bio xml:lang="ru"><p>Мамиева Ираида Ахсарбеговна, ведущий специалист инженерной академии РУДН </p><p>г. Москва</p></bio><bio xml:lang="en"><p>Mamieva Iraida A., lead specialist at the Engineering Academy</p><p>Moscow</p></bio><email xlink:type="simple">i_mamieva@mail.ru</email><xref ref-type="aff" rid="aff-2"/></contrib></contrib-group><aff-alternatives id="aff-1"><aff xml:lang="ru"><institution>Центральный научно-исследовательский и проектно-экспериментальный институт промышленных зданий и сооружений (ЦНИИПромзданий)</institution></aff><aff xml:lang="en"><institution>Central Scientific Research Institute for Industrial Buildings and Structure</institution></aff></aff-alternatives><aff-alternatives id="aff-2"><aff xml:lang="ru"><institution>Российский университет дружбы народов им. П. Лумумбы</institution></aff><aff xml:lang="en"><institution>RUDN University</institution></aff></aff-alternatives><pub-date pub-type="collection"><year>2023</year></pub-date><pub-date pub-type="epub"><day>09</day><month>11</month><year>2023</year></pub-date><volume>0</volume><issue>5</issue><fpage>76</fpage><lpage>86</lpage><permissions><copyright-statement>Copyright &amp;#x00A9; Алборова Л.А., Мамиева И.А., 2023</copyright-statement><copyright-year>2023</copyright-year><copyright-holder xml:lang="ru">Алборова Л.А., Мамиева И.А.</copyright-holder><copyright-holder xml:lang="en">Alborova L.A., Mamieva I.A.</copyright-holder><license xml:lang="ru" license-type="creative-commons-attribution" xlink:href="https://creativecommons.org/licenses/by/4.0/" xlink:type="simple"><license-p>Данная работа распространяется под лицензией Creative Commons Attribution 4.0.</license-p></license><license xml:lang="en" license-type="creative-commons-attribution" xlink:href="https://creativecommons.org/licenses/by/4.0/" xlink:type="simple"><license-p>This work is licensed under a Creative Commons Attribution 4.0 License.</license-p></license></permissions><self-uri xlink:href="https://construction.elpub.ru/jour/article/view/659">https://construction.elpub.ru/jour/article/view/659</self-uri><abstract><p>До настоящего времени систематизированы существующие архитектурные стили со своими модификациями, подвидами и стилевыми течениями применительно к тонким оболочкам и оболочечным структурам. Имеются несколько хронологий развития архитектурных стилей. Установлено, что интенсивность и разнообразие применения аналитических и аналитически незадаваемых поверхностей в архитектуре оболочечных структур, тонких оболочек и во внешних формах разнообразных сооружений поддаются разбиению на пять временных периодов. Последний пятый период было решено назвать «Возрождение интереса к оболочкам и сооружениям криволинейной формы, возникновение новых архитектурных стилей». Согласно материалам исследования он начался в начале XXI-го века. В данной статье показано, что до сегодняшнего времени нашли применение 37 аналитических поверхностей из более шести сотен известных поверхностей. Авторы констатируют реальное положение в архитектуре криволинейных форм и показывают возрастающий интерес архитекторов и строителей к таким объектам. Показано, что с 2000- го года использованы 16 основных архитектурных стилей, не считая новейшие стили, заявленные архитекторами, но обозначенные одним-двумя сооружениями. Перечислены с конкретными примерами аналитические и аналитически незадаваемые поверхности нашедшие применение в реальных сооружениях. Указаны архитекторы, участвовавшие в проектировании наиболее значимых зданий и сооружений.</p></abstract><trans-abstract xml:lang="en"><p>To date, the existing architectural styles have been systematized with their modifications, subspecies and style trends in relation to thin shells and shell structures. There are several chronologies of the development of architectural styles. It has been established that the intensity and variety of the use of analytical and analytically non-assignable surfaces in the architecture of shell structures, thin shells and in the external forms of various structures can be divided into five time periods. The last fifth period was decided to be called "The revival of interest in shells and curvilinear structures, the emergence of new architectural styles." According to the research materials, it began at the beginning of the XXI century. This article shows that up to now 37 analytical surfaces out of more than six hundred known surfaces have been used. The authors constate the real situation in the architecture of curvilinear forms and show the increasing interest of architects and builders in such objects. It is shown that since 2000, 16 main architectural styles have been used, not counting the latest styles declared by architects, but designated by one or two structures. Analytical and analytically undetectable surfaces that have found application in real structures are listed with specific examples. The architects who participated in the design of the most significant buildings and structures of curvilinear forms at the beginning of the XXI century are indicated. The literature used contains 32 titles.</p></trans-abstract><kwd-group xml:lang="ru"><kwd>архитектура оболочек</kwd><kwd>аналитические поверхности</kwd><kwd>этапы строительства оболочек</kwd></kwd-group><kwd-group xml:lang="en"><kwd>shell architecture</kwd><kwd>analytical surfaces</kwd><kwd>shell construction stages</kwd></kwd-group></article-meta></front><back><ref-list><title>References</title><ref id="cit1"><label>1</label><citation-alternatives><mixed-citation xml:lang="ru">Krivoshapko S.N., Christian A. Bock Hyeng, Mamieva I.A. Chronology of erection of the earliest reinforced concrete shells // International Journal of Research and Reviews in Applied Sciences. 2014. Vol. 18. Iss. 2. Pр. 95-108.</mixed-citation><mixed-citation xml:lang="en">Krivoshapko S.N., Christian A. Bock Hyeng, Mamieva I.A. Chronology of erection of the earliest reinforced concrete shells. International Journal of Research and Reviews in Applied Sciences. 2014. Vol. 18. No. 2. Pр. 95-108.</mixed-citation></citation-alternatives></ref><ref id="cit2"><label>2</label><citation-alternatives><mixed-citation xml:lang="ru">Krasić S. Geometrijske površi u arhitekturi. Gradevinsko-arhitektonski fakultet Univerzitet u Nišu. Štampa Galaksija, Niš. 2012. 238 p.</mixed-citation><mixed-citation xml:lang="en">Krasić Sonja. Geometrijske površi u arhitekturi. Gradevinsko- arhitektonski fakultet Univerzitet u Nišu. Štampa Galaksija, Niš, 2012. 238 p.</mixed-citation></citation-alternatives></ref><ref id="cit3"><label>3</label><citation-alternatives><mixed-citation xml:lang="ru">Butelski K. The Architecture of Curved Shapes // Nexus Network Journal. January. 2000. Vol. 2. No. 1. Pp. 19-23. doi:10.1007/s00004-999-0004-x.</mixed-citation><mixed-citation xml:lang="en">Butelski K. The Architecture of Curved Shapes. Nexus Network Journal. January 2000. Vol. 2(1). Pp. 19- 23. doi:10.1007/s00004-999-0004-x.</mixed-citation></citation-alternatives></ref><ref id="cit4"><label>4</label><citation-alternatives><mixed-citation xml:lang="ru">Encyclopedia of 20-th Century Architecture. R. Stephen Sennot, Editor. Taylor &amp; Francis Group. NY. 2003. doi:4324/9780203483886</mixed-citation><mixed-citation xml:lang="en">Encyclopedia of 20-th Century Architecture. R. Stephen Sennot, Editor. Taylor &amp; Francis Group. NY. 2003. doi:4324/9780203483886</mixed-citation></citation-alternatives></ref><ref id="cit5"><label>5</label><citation-alternatives><mixed-citation xml:lang="ru">Krivoshapko S.N. Shell structures and shells at the beginning of the 21st century // Structural Mechanics of Engineering Constructions and Buildings. 2021. Vol. 17. No. 6. Pp. 553-561. doi:10.22363/1815-5235-2021-17-6-553-561</mixed-citation><mixed-citation xml:lang="en">Krivoshapko S.N. Shell structures and shells at the beginning of the 21st century. Structural Mechanics of Engineering Constructions and Buildings. 2021. Vol. 17. No. 6. Pp. 553-561. doi:10.22363/1815-5235-2021-17-6-553- 561</mixed-citation></citation-alternatives></ref><ref id="cit6"><label>6</label><citation-alternatives><mixed-citation xml:lang="ru">Adnan F., Yunus R.M. The influence of curvilinear architectural forms on environment behaviour // Procedia - Social and Behavioral Sciences. December 2012. Vol. 49. Pp. 341-349. doi:10.1016/j.sbspro.2012.07.032</mixed-citation><mixed-citation xml:lang="en">Adnan F., Yunus R.M. The influence of curvilinear architectural forms on environment behavior. Procedia - Social and Behavioral Sciences. December 2012. No. 49. Pp. 341-349. doi:10.1016/j.sbspro.2012.07.032</mixed-citation></citation-alternatives></ref><ref id="cit7"><label>7</label><citation-alternatives><mixed-citation xml:lang="ru">Krivoshapko S.N., Christian A. Bock Hyeng, Gil-oulbe Mathieu. Stages and architectural styles in design and building of shells and shell structures // Building and Reconstruction. 2022. № 4(102). С. 112-131. doi:10.33979/2073-7416-2022-102-4-112-131</mixed-citation><mixed-citation xml:lang="en">Krivoshapko S.N., Christian A. Bock Hyeng, Gil-oulbe Mathieu. Stages and architectural styles in design and building of shells and shell structures. Building and Reconstruction. 2022. No. 4 (102). Pp. 112-131. doi:10.33979/2073-7416-2022-102-4-112-131</mixed-citation></citation-alternatives></ref><ref id="cit8"><label>8</label><citation-alternatives><mixed-citation xml:lang="ru">Кривошапко С.Н., Алборова Л.А., Мамиева И.А. Оболочечные структуры: генезис, материалы и подвиды. Часть 1: Подвиды и направления // Academia. Архитектура и строительство. 2021. № 3. С. 125-134. doi:10.22337/2077-9038-2021-3-125-134</mixed-citation><mixed-citation xml:lang="en">Krivoshapko S.N., Alborova L.A., Mamieva I.A. Shell structures: genesis, materials, and subtypes. Part 1. Subtypes and directions. Academia. Architecture and Construction. 2021. No. 3. Pp. 125-134. doi:10.22337/2077- 9038-2021-3-125-134. (rus)</mixed-citation></citation-alternatives></ref><ref id="cit9"><label>9</label><citation-alternatives><mixed-citation xml:lang="ru">Сысоева Е.В. Научные подходы к расчету и проектированию большепролетных конструкций // Вестник МГСУ. 2017. Т. 12. № 2(101). С. 131-141. doi:10.22227/1997-0935.2017.2.131-141</mixed-citation><mixed-citation xml:lang="en">Sysoeva E.V. Nauchnye podkhody k raschetu i proektirovaniyu bol’sheproletnykh konstruktsiy [Scientific Approaches to Calculation and Design of Large-Span Structures]. Vestnik MGSU [Monthly Journal on Construction and Architecture]. 2017. Vol. 12. No. 2(101). Pp. 131-141. doi:10.22227/1997-0935.2017.2.131-141 (rus.)</mixed-citation></citation-alternatives></ref><ref id="cit10"><label>10</label><citation-alternatives><mixed-citation xml:lang="ru">Братухин А.Г., Сироткин О.С., Сабодаш П.Ф., Егоров В.Н. Материалы будущего и их удивительные свойства. М. : Машиностроение, 1995. 128 с.</mixed-citation><mixed-citation xml:lang="en">Bratukhin A.G., Sirotkin O.S., Sabodash P.F., Egorov V.N. Materials of Future and their Wonderful Properties. Moscow: Mashinostroenie Publ.; 1995. 128 p. (rus)</mixed-citation></citation-alternatives></ref><ref id="cit11"><label>11</label><citation-alternatives><mixed-citation xml:lang="ru">Киселева И.А. Применение кривых поверхностей в строительстве и инженерной практике / В сб.: Дни студенческой науки. Сб. докладов научно-технической конференции по итогам научно-исследовательских работ студентов института строительства и архитектуры. Министерство образования и науки Российской Федерации. МГСУ. 2018. С. 319-321.</mixed-citation><mixed-citation xml:lang="en">Kiseleva I.A. The application of curvilinear surfaces in building and engineering practice. In book: Dni Studencheskoy Nauki [Days of Student Science]. Proc.: Reports of Scientific-and-Technical Conference under the Final Results of Scientific-and-Research Works of Students of Institute of Building and Architecture of MONRF, MGSU, 2018. Pp. 319-321.</mixed-citation></citation-alternatives></ref><ref id="cit12"><label>12</label><citation-alternatives><mixed-citation xml:lang="ru">Gil-oulbe Mathieu. Reserve of analytical surfaces for architecture and construction // Building and Reconstruction. 2021. No. 6 (98). Pp. 63-72. doi:10.33979/2073-7416-2021-98-6-63-72</mixed-citation><mixed-citation xml:lang="en">Gil-oulbe Mathieu. Reserve of analytical surfaces for architecture and construction // Building and Reconstruction. 2021. No. 6 (98). Pp. 63-72. doi:10.33979/2073-7416-2021-98-6-63-72</mixed-citation></citation-alternatives></ref><ref id="cit13"><label>13</label><citation-alternatives><mixed-citation xml:lang="ru">Zhou F.-X. A constant slope surface and its application / 3rd International Conference on Geology, Mapping and Remote Sensing (ICGMRS), 2022. Pp. 78-81. doi:10.1109/ICGMRS55602.2022.9849334</mixed-citation><mixed-citation xml:lang="en">Zhou F.-X. A constant slope surface and its application. 2022 3rd International Conference on Geology, Mapping and Remote Sensing (ICGMRS). 2022. Pp. 78-81. doi:10.1109/ICGMRS55602.2022.9849334</mixed-citation></citation-alternatives></ref><ref id="cit14"><label>14</label><citation-alternatives><mixed-citation xml:lang="ru">Иванов В.Н., Алешина О.О. Геометрия прямых коноидов с ортогональной системой координат // Строительная механика и расчет сооружений. 2023. № 2 (307). С. 53-62. doi:10.37538/0039-2383.2023.2.53.62</mixed-citation><mixed-citation xml:lang="en">Ivanov V.N., Aleshina O.O. Geometry of right conoids with an orthogonal coordinate system. Structural Mechanics and Analysis of Constructions. 2023. No. 2(307). Pp. 53-62. doi:10.37538/0039-2383.2023.2. 53.62 (rus)</mixed-citation></citation-alternatives></ref><ref id="cit15"><label>15</label><citation-alternatives><mixed-citation xml:lang="ru">Zhang J., Wang M., Wang W., Tang W. Buckling of egg-shaped shells subjected to external pressure // Thin-Walled Structures. 2017. Vol. 113. Pp. 122-128</mixed-citation><mixed-citation xml:lang="en">Zhang J., Wang M., Wang W., Tang W. Buckling of egg-shaped shells subjected to external pressure. Thin-Walled Structures. 2017. Vol. 113. Pp. 122-128.</mixed-citation></citation-alternatives></ref><ref id="cit16"><label>16</label><citation-alternatives><mixed-citation xml:lang="ru">Иванов В.Н. Геометрия и формообразование многогранных коробчатых криволинейных поверхностей на базовой циклической поверхности // Строительная механика инженерных конструкций и сооружений. 2012. № 2. С. 3-10.</mixed-citation><mixed-citation xml:lang="en">Ivanov V.N. Geometry and forming of the polyhedral box type surfaces on base cyclic surface. Structural Mechanics of Engineering Constructions and Buildings. 2012. No. 2. Pp. 3-10. (rus) 17. Krivoshapko S.N. Geometry and strength of general helicoidal shells. Applied Mechanics Reviews. May 1999. Vol. 52. No. 5. Pp. 161-175. doi:10.1115/1.3098932</mixed-citation></citation-alternatives></ref><ref id="cit17"><label>17</label><citation-alternatives><mixed-citation xml:lang="ru">Krivoshapko S.N. Geometry and strength of general helicoidal shells // Applied Mechanics Reviews. May 1999. Vol. 52. No. 5. Pp. 161-175. doi:10.1115/1.3098932</mixed-citation><mixed-citation xml:lang="en">Velimirović L.S., Radivojević G., Stanković M.S., Kostić D. Minimal surfaces for architectural constructions. Facta Universitatis. Series: Architecture and Civil Engineering. 2008. Vol. 6. No 1. Pp. 89-96. doi:10.2298/FUACE0801089V</mixed-citation></citation-alternatives></ref><ref id="cit18"><label>18</label><citation-alternatives><mixed-citation xml:lang="ru">Velimirović L.S., Radivojević G., Stanković M.S., Kostić D. Minimal surfaces for architectural constructions // Facta Universitatis. Series: Architecture and Civil Engineering. 2008. Vol. 6. No 1. Pp. 89-96. doi:10.2298/FUACE0801089V</mixed-citation><mixed-citation xml:lang="en">Alborova L.A. Minimal surfaces in building and architecture. Biosfernaya sovmestimost': chelovek, region, tekhnologii [Biosphere compatibility: human, region, technologies]. 2021. No. 1. Pp. 3-11. doi:10.21869/2311- 1518-2021-33-1-3-11 (rus)</mixed-citation></citation-alternatives></ref><ref id="cit19"><label>19</label><citation-alternatives><mixed-citation xml:lang="ru">Алборова Л.А. Минимальные поверхности в строительстве и архитектуре// Биосферная совместимость: человек, регион, технологии. 2021. № 1. С. 3-11. doi:10.21869/2311-1518-2021-33-1-3-11</mixed-citation><mixed-citation xml:lang="en">Cheshkova M.A. Clifford torus and Klein bottle. Izvestiya Altaiskogo Gosudarstvennogo Universiteta. 2017. No. 1 (93). Pp. 144-147. doi:10.14258/izvasu(2017)1-29 (rus)</mixed-citation></citation-alternatives></ref><ref id="cit20"><label>20</label><citation-alternatives><mixed-citation xml:lang="ru">Чешкова М.А. Тор Клиффорда и бутылка Клейна // Известия Алтайского государственного университета. 2017. № 1 (93). С. 144-14. doi:10.14258/izvasu(2017)1-29</mixed-citation><mixed-citation xml:lang="en">Ganeyeva M.S., Skvortzova Z.V. Stress-strain state of catenoid shell of revolution from orthotropic material. Aktualnie Problemi Mechaniki Sploshnoy Sredy [Actual Problems of Mechanics of Solid Body]. IMM KazNTz RAN. Vol. II. Kazan, 2011. Pp. 153-160. (rus)</mixed-citation></citation-alternatives></ref><ref id="cit21"><label>21</label><citation-alternatives><mixed-citation xml:lang="ru">Ганеева М.С., Скворцова З.В. Напряженно-деформированное состояние катеноидной оболочки вращения из ортотропного материала // Актуальные проблемы механики сплошной среды. К 20-летию ИММ КазНЦ РАН: сб. статей. Том II. Казань: ИММ КазНЦ РАН, 2011. С. 153-160.</mixed-citation><mixed-citation xml:lang="en">Mamieva I.A. Analytical surfaces for parametrical architecture in contemporary buildings and structures. Academia. Architecture and Construction. 2020. No. 1. Pp. 150-165. http://aac.raasn.ru/index.php/aac/article/view/201 (date of application: 24.03.2023). (rus)</mixed-citation></citation-alternatives></ref><ref id="cit22"><label>22</label><citation-alternatives><mixed-citation xml:lang="ru">Мамиева И.А. Аналитические поверхности для параметрической архитектуры в современных зданиях и сооружениях // Academia. Архитектура и строительство. 2020. № 1. С. 150–165 http://aac.raasn.ru/index.php/aac/article/view/201.</mixed-citation><mixed-citation xml:lang="en">Ivanov V.N., Rynkovskaya M.I. Application of circular surfaces to the architecture of the buildings, structures and products. RUDN journal of engineering research. 2015. No. 3. Pp. 111-119. (rus)</mixed-citation></citation-alternatives></ref><ref id="cit23"><label>23</label><citation-alternatives><mixed-citation xml:lang="ru">Иванов В.Н., Рынковская М.И. Применение циклических поверхностей в архитектуре зданий, конструкций и изделий // Вестник РУДН. Инженерные исследования. 2015. № 3. С. 111-119. 24. Гринько Е.А. Поверхности плоскопараллельного переноса конгруэнтных кривых // Строительная механика и расчет сооружений. 2021. № 3. С. 71–77. doi:10.37538/0039-2383.2021.3.71.77</mixed-citation><mixed-citation xml:lang="en">Grinko E.A. Surfaces of plane-parallel transfer of congruent curves. Structural Mechanics and Analysis of Constructions. 2021. No. 3. Pp. 71-77. doi:10.37538/0039-2383.2021.3.71.77 (rus)</mixed-citation></citation-alternatives></ref><ref id="cit24"><label>24</label><citation-alternatives><mixed-citation xml:lang="ru">Барчугова Е.В. Параметризм как направление современной проектной деятельности // Архитектура и современные информационные технологии. 2013. № 4(25). 4 с. EDN: RRETSJ</mixed-citation><mixed-citation xml:lang="en">Barchugova E.V. Parametrism as direction of the modern project. Architecture and modern information technologies. 2013. No. 4(25). 4 p. EDN: RRETSJ. (rus)</mixed-citation></citation-alternatives></ref><ref id="cit25"><label>25</label><citation-alternatives><mixed-citation xml:lang="ru">Маяцкая И.А., Беловолов М.Г. Применение фрактальных поверхностей при проектировании сооружений // Актуальные проблемы науки и техники: Материалы Национ. науч.-практ. конф. Ростов-на-Дону, Дон. гос. техн. ун-т (ДГТУ). Ростов-на-Дону, 2020. С. 1695-1697.</mixed-citation><mixed-citation xml:lang="en">Mayatzkaya I.A., Belovolov M.G. Application of fractal surfaces in design of erections. Aktualnie Problemi Nauki i Techniki [Actual Problems of Science and Engineering]. DGTU, Rostov-na-Donu. 2020. Pp. 1695- 1697. (rus)</mixed-citation></citation-alternatives></ref><ref id="cit26"><label>26</label><citation-alternatives><mixed-citation xml:lang="ru">Кривошапко С.Н. К вопросу об основных архитектурных стилях, направлениях и стилевых течениях для оболочек и оболочечных структур // Строительная механика инженерных конструкций и сооружений. 2022. Т. 18. № 3. С. 255-268. doi:10.22363/1815-5235-2022-18-3-255-268</mixed-citation><mixed-citation xml:lang="en">Krivoshapko S.N. On the basic architectural styles, directions, and style flows for shells and shell structures. Structural Mechanics of Engineering Constructions and Buildings. 2022. Vol. 18. No. 3. Pp. 255-268. doi:10.22363/1815-5235-2022- 18-3-255-268. (rus)</mixed-citation></citation-alternatives></ref><ref id="cit27"><label>27</label><citation-alternatives><mixed-citation xml:lang="ru">Марченко Л.А., Негай Г.А. Анализ криволинейности в архитектуре // Новые идеи нового века: Материалы Международной научной конференции. ФАД ТОГУ. 2013. Т. 1. С. 191-197. [EDN: PZAIAB].</mixed-citation><mixed-citation xml:lang="en">Marchenko L.A., Negay G.A. Curvilinear analysis in architecture. Novie Idei Novogo Veka [New Ideas of New Century]. Proc. of International Scientific Conference FAD TOGU. 2013. Vol. 1. Pp. 191-197. (rus)</mixed-citation></citation-alternatives></ref><ref id="cit28"><label>28</label><citation-alternatives><mixed-citation xml:lang="ru">Hyeng Christian A. Bock, Yamb Emmanuel B. Application of cyclic shells in architecture, machine design, and bionics // Int. J. of Modern Engineering Research. 2012. Vol. 2. No. 3. Pp. 799-806.</mixed-citation><mixed-citation xml:lang="en">Hyeng Christian A. Bock, Yamb Emmanuel B. Application of cyclic shells in architecture, machine design, and bionics. Int. J. of Modern Engineering Research. 2012. Vol. 2. No. 3. Pp. 799-806.</mixed-citation></citation-alternatives></ref><ref id="cit29"><label>29</label><citation-alternatives><mixed-citation xml:lang="ru">Бойков И.К. Геометрия циклид Дюпена и их применение в строительных объектах // Расчет оболочек строительных конструкций. М.: УДН. 1982. С. 116-129.</mixed-citation><mixed-citation xml:lang="en">Boikov I.K. Geometry of Dupin cyclides and their application for building structures. Raschet Obolochek Stroitelnych Konstruktziy [Analysis of Shells of Building Structures]. Moscow: UDN, 1982. Pp. 116-129. (rus)</mixed-citation></citation-alternatives></ref><ref id="cit30"><label>30</label><citation-alternatives><mixed-citation xml:lang="ru">Иващенко Н.А. Архитектура брутализма в зарубежном и российском искусствознании после Рейнера Бэнема // Артикульт. 2022. №4(48). С. 6-16. doi:10.28995/2227-6165-2022-4-6-16</mixed-citation><mixed-citation xml:lang="en">Ivaschenko N.A. Brutalist architecture in Russian and foreign art history after Reyner Banham. Articult. 2022. No. 4(48). Pp. 6-16. doi:10.28995/2227-6165-2022-4-6-16. (rus)</mixed-citation></citation-alternatives></ref><ref id="cit31"><label>31</label><citation-alternatives><mixed-citation xml:lang="ru">Бондаренко И.А. Об уместности и умеренности архитектурных новаций // Academia // Архитектура и строительство. 2020. № 1. С. 13-18. http://aac.raasn.ru/index.php/aac/article/view/185. (дата обращения: 24.03.2023)</mixed-citation><mixed-citation xml:lang="en">Bondarenko I.A. On the appropriateness and moderation of architectural innovation. Academia. Arkhitektura i Stroitel'stvo. Academia. Architecture and Construction. 2020. Vol. 1. Рр. 13-18. http://aac.raasn.ru/index.php/aac/article/view/185. (date of application: 24.03.2023). (rus)</mixed-citation></citation-alternatives></ref></ref-list><fn-group><fn fn-type="conflict"><p>The authors declare that there are no conflicts of interest present.</p></fn></fn-group></back></article>
